Generator operational logic

Automatic operation conditions

• SOC trigger 
  
  • Start generator when SOC drops to the set value 
  • Stop generator when SOC reaches to the set time
• Timing trigger 
  • Start when set time is reached 
  • Stop when set time is exceeded

Core operation logic

Single condition triggers operation

• If only turned on due to SOC
  • Stop when SOC is raised to the set value before the set time is reached during operation 

• If only turned on due to timed time
  • Does not reach the set time during operation, stop only if the SOC is raised to the set value

Two conditions trigger operation at the same time 

• If both "SOC" and "Time" conditions
  • Started due to low SOC, then reached setup time
  • Started due to timing, then SOC dropped to startup value

• Operation stops when both conditions are met 
  • SOC is raised to the set value 
  • Time exceeds the set time period