Solar Power Backup Systems

Home energy storage · Oct 13, 2022

What Is Solar Power?

Solar power is the use of natural radiation (sun), which shines to the surface of the earth, into solar technology. 

To extensively understand what solar power is - It is a form of radiation emanating from the sun capable of producing heat, causing chemical reactions, or generating electricity.

This highly distributed source can meet all future energy demands if adequately exploited. Due to its limitless supply and lack of pollution, solar power is predicted to become a more appealing renewable energy source in the 21st century than finite fossil fuels, coal, petroleum, and natural gas.

By extension, we need to know how to apply this solar power at our various residential apartments as it serves low cost of bills and all the benefits attached to having one in your respective houses.

How to Implement Solar Power Systems at Home

Start with a sustainable home by employing solar power. Start implementing these suggestions to reduce your electricity costs!

Solar power has emerged as a fantastic alternative to reduce electricity costs in homes, businesses, and industries. This kind of installation also helps to safeguard the environment.

Today, solar power at home is possible thanks to the installation of photovoltaic panels, commonly known as solar panels or plates, as well as a regulator, batteries, and an inverter.

Although purchasing a solar power backup system for your home could strain your budget, it's crucial to understand that you will benefit significantly from this purchase for the rest of your lives. Similar advantages include having a sustainable home that consumes its electricity, not having a detrimental environmental impact, and saving money on electricity.

The following guidelines will help you efficiently implement your home solar power backup systems.

  • Check the installation location
  • Install the solar panels
  • Get a charge controller
  • Connect controller and inverter to batteries
  • Plug the solar panels into the rest of the system.

The aforementioned bullets shall be briefly explained further to absorb the techniques vividly.

Check the Installation Location

You must first be aware of your home's orientation to maximize solar energy consumption there. Precisely, to determine the time of day when more sun rays are filtered. This will ensure that the solar panels and the supporting structure are appropriately installed.

A more effective way to take advantage of those solar rays is by acquiring solar trackers, which trap the rays during the day and adjust automatically at night.  If you choose this option, you will have to hire a professional and invest a little more money in the installation to get your house with solar energy.

Install the Solar Panels

In this section, choosing the number of solar panels to install is necessary to ensure that the property has a sufficient source of electricity after you know where the panels will be placed. For instance, three solar panels are needed to power a 60 m2 building.

To understand this system better, you should know that each panel contains several connected solar cells. When exposed to the sun, enough electrical voltage is produced to turn on a lamp or an appliance.  Taking this as a basis, to charge a 12V battery, you need an 18V panel that contains 36 solar cells of half a volt each.

You must enlist the aid of a professional throughout this procedure; he will be able to advise you by determining the number of panels your property requires and completing the installation quickly and safely.

Get A Charge Controller

A charge controller controls the system's charge level in homes powered by solar energy. This controller will aid in preventing both battery deterioration and residential power surges or electrical discharges. In this manner, you can begin attaching the solar panels to the charge controller you bought as soon as they are installed.

Connect the Controller and Inverter to the Batteries

If your batteries are direct current, you must connect the system to the charge controller. The batteries must then be plugged directly into an inverter, which is a device that converts direct current into alternating current and regulates it under the demand and production of the home. On the other hand, some areas of the country have alternating currents.

Later you will have to plug them into a converter, where the direct current created by the solar panels will be converted into usable alternating current.

Once this is achieved, you can connect your inverter to the main power source or connect devices and appliances directly to the batteries, always taking into account the type of energy available in your home.  In simpler words, you will have to connect the inverter directly to the panels, and then you will need to invert it into the charge controller.

Plug the Solar Panels into the Rest of the System

Once you've run through the steps above, you'll need to make sure everything is connected securely:

  1. The panels must be connected to the charging converter.
  2. The charging converter will have to be connected to the batteries.
  3. The batteries must be connected to the inverter, which will be connected to the main system.

Once this is achieved, the system will introduce solar power backup into the home.


You should be aware that Solar Power Backup Systems for home contribute to the supply of everything that requires power to operate, including lighting, appliances, and other items. Because of this, it's crucial and best to use solar panels properly. Likewise, purchasing bioclimatic homes is a fantastic way to save money and protect the environment.

franklin home power